PolySupport™ for PA12

GRASS GREEN / 1.75 mm / 1 kg

15.000 KD

PolySupport™ for PA12

15.000 KD

TECHNICAL PRINTING METRICS

NOZZLE TEMPERATURE

280-300

BED TEMPERATURE

25-50

PRINTING SPEED

20 - 40 mm/s

ENCLOSURE REQUIREMENT

Not Required

CARE & MAINTENANCE

DRYING RECOMMENDATION

55 °C for 6 hours (only if damp)

STORAGE RECOMMENDATION

hygroscopic

Moisture Sensitive: Proper drying & storage required to prevent print failures and stringing.

PolySupport™ for PA12

PolySupport™ is a break away support for Polymaker Nylon 12 based filaments. It has a perfect interface with Nylon 12, strong enough to support it and easily removable by hand.

Intended for Nylon12 - so it should not be used with PolyMide™ CoPA.

Printing and Drying Settings?

Printing Temperature: 270˚C - 300˚C
Bed Temperature: 50˚C - 80˚C
Printing Speed: 30mm/s - 60mm/s
Fan: ON

Direct Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s

Drying Settings: 100˚C for 8h
(Only if the material has absorbed moisture)