PolySupport™

Pearl White / 1.75 mm / 1 kg

12.000 KD

PolySupport™

12.000 KD

TECHNICAL PRINTING METRICS

NOZZLE TEMPERATURE

220 - 230 °C

BED TEMPERATURE

25 - 60 °C

PRINTING SPEED

20 - 40 mm/s

ENCLOSURE REQUIREMENT

Not Required

CARE & MAINTENANCE

DRYING RECOMMENDATION

55 °C for 6 hours (only if damp)

STORAGE RECOMMENDATION

Store in a sealed bag with desiccant

Moisture Sensitive: Proper drying & storage required to prevent print failures and stringing.

PolySupport™

PolySupport™ is a break away support for Polymaker PLA based filaments. It has a perfect interface with PLA, strong enough to support it and easily removable by hand.

Can I use PolySupport™ with other materials than PLA?

We have designed PolySupport™ specifically for PLA. However we had positive customer feedback on using PolySupport™ with PolySmooth™, PolyCast™ and small PolyMax™ PC parts.

Printing and Drying Settings?

Bed Temperature: 25˚C - 60˚C
Printing Speed: 20mm/s - 40mm/s
Fan: ON

Direct Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s

Drying Settings: 55˚C for 6h
(Only if the material has absorbed moisture)